Top Sellers

Shop

Tamiya Track and wheel set Set

The Track and Wheel Set offers three different lengths of tracks to choose from, allowing for a large degree of adjustability and creativity in design. Sprocket wheels, idler wheels, and road wheels have all been includ

7.5 KWD Add to Cart

TCS230 TCS3200 Detector Module Color Recognition Sensor for Arduino BEST

Chip: TCS3200
Input voltage: DC 3 ~ 5V
Output frequency voltage: 0 ~ 5V
Use bright white LED lights
Can be connected directly with Microcontroller
Static detection of the measured object color
Best detection distance: 10mm
Size:3.3x3.3x2.5cm(approx)

 

 

 

 

 

3.5 KWD Add to Cart

Thermistor 10K-Sparkfun -SEN-00250

10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor.

0.750 KWD Add to Cart

Tiny AVR Programmer

The ATtiny45 and 85 are a couple of really cool little MCUs but did you know you can program them in Arduino? That’s right, now you can shrink your Arduino projects down to “tiny size” by moving your code straight over to these small but capable ICs. The standard method for programming the ATtiny ICs involves a breadboard, lots of jumper wires and a hardware programmer, but David Mellis over at MIT Media Lab has simplified the process by laying out this handy USB programmer.

The Tiny AVR Programmer plugs directly into your USB port and provides a programming socket for the ATTiny45 and 85. Just slot an ATtiny with a DIP footprint into the socket, plug the programmer into your USB port and start up the Arduino IDE. After installing the proper board definitions, you simply program it the same way you would any other Arduino board. The programmer even breaks out the IC pins to female headers so you can easily prototype around the ATtiny without pulling and plugging it over and over. There are two ISP headers that have also been broken out so you can use the programmer or solder in a 6-pin header for other AVR microcontrollers!

Note: You’ll need to install the USBTinyISP drivers if you don’t have them yet, you can find them in the documents tab!

 

 

Hookup guide

11.00 KWD Outof Stock

TMP 36 sensor

This is the same temperature sensor that is included in our SparkFun Inventor's Kit. The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn't require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature range. We like it because it's so easy to use: Just give the device a ground and 2.7 to 5.5 VDC and read the voltage on the Vout pin. The output voltage can be converted to temperature easily using the scale factor of 10 mV/°C.

1.5 KWD Add to Cart

Toggle switch 6A 125VAc

  • Mini Toggle Switch 3 Pins-SPDT-ON-ON 6A/125V AC
0.750 KWD Add to Cart

Toggle switch MTS-103

Miniature Toggle Switch Single Pole Double Throw SPDT (MTS103) ON-OFF-ON 120VAC 6A 1/4 Inch Mounting

0.750 KWD Add to Cart

Tower Pro 13KG 15KG Servos - MG995  Metal Gear

It has metal gears which makes it robust and reliable motors. These TowerPro MG995 Metal Gear Servo Motors are the high-speed servo motors with the mighty torque of 10 kg/cm.

The optimized performance and reliability of this servo have made it the favorite choice of many RC hobbyists.

The TowerPro MG995 High-Speed Digital Servo Motor rotates 90° in each direction making it 180° servo motor. It is a Digital Servo Motor which receives and processes PWM signal faster and better. It equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces.

They are packed within a tight sturdy plastic case which makes them water and dust resistant which is a very useful feature in RC planes, Boats, and RC Monster Trucks etc. It equips 3-wire JR servo plug which is compatible with Futaba connectors too.

Wire Description

RED – Positive

Brown – Negative

Orange – Signal

4.00 KWD Add to Cart

Tower Pro MG90S Metal Geared Micro Servo for Toy Boat Car Airplane Helicopter Micro Metal Gear

We have First quality  of original Towerpro MG90S Mini Digital Servo from our trusted supplier. Though these are the copy of the original Mini TowerPro servo’s, they are compatible with all the applications that use the genuine Tower Pro MG90s because of their same size, comparable quality, and optimized performance.

The Towerpro MG90S Mini Digital Servo is 90° rotation servo. It is a Digital Servo Motor which receives and processes PWM signal faster and better. It equips sophisticated internal circuitry that provides good torque, holding power, and faster updates in response to external forces.

The good optimized performance and reliability of our servos have made them the favorite choice of many RC hobbyists.

They are packed within a tight sturdy plastic case which makes them water and dust resistant which is a very useful feature in RC planes, Boats, and RC Monster Trucks etc. It equips 3-wire JR servo plug which is compatible with Futaba connectors too.

2.500 KWD Add to Cart

Tsunami Super WAV Trigger

The Tsunami Super WAV Trigger is the next evolutionary step beyond the original WAV Trigger.

Based on a new generation ARM Cortex M7, the Tsunami extends polyphony to 32 mono or 18 stereo simultaneous uncompressed 44.1kHz, 16-bit tracks. Each track can start, pause, resume, loop and stop independently, and can have its own volume setting, allowing you to create the perfect interactive mix of music, dialog and sound effects. The Tsunami also supports true seamless looping over an arbitrary track length.

The big news is that the Tsunami has 8 audio output channels, arranged as either 8 mono or 4 stereo pairs. Alternate versions of firmware support either mono and stereo architecture – you choose. The mono version adds a new “Synced Set” trigger function that can start up to 8 mono tracks on adjacent outputs. These tracks will start and stay in sample-sync for playing stereo or even 5.1 or 7.1 surround sound content with a single trigger. Any track can be dynamically routed to any output. And each output provides independent real-time volume and sample-rate conversion (pitch bend). For your convenience, the Tsunami also has full Arduino and Python libraries available which can be found in the Documents tab above!

Each Tsunami Super WAV Trigger has a dedicated MIDI port with an integrated opto-isolator, making it easy to connect to any MIDI controller. Tsunami’s MIDI implementation includes control of volume, pitch bend, attack and release times, and the ability to route any MIDI key to any of the output channels, as well as specifying single-shot or looping playback per key. It is very important to know that this is a 3.3V device, and its inputs – including triggers and serial RX – are not 5V tolerant!

Note: The Tsunami Super WAV Trigger will only work properly if your uSD card is formatted with the correct file allocation size (32Kb). If this is set incorrectly during formatting, then the Tsunami will show every erratic behavior and occasionally crash.

hook up guide..

Tsunami User guide

Tutorials and examples:

Tsunami Super WAV Trigger

19.00 KWD Add to Cart

Ultra-Small Size DC-DC 5v step-down buck converter 3a output 24V/12V to 5 V

Mini DC-DC 12-24V To 5V 3A Step Down Power Supply Module Voltage Buck Converter Adjustable Efficiency 97.5%.

Buck converters feature a controller with one or more integrated FETs and an external inductor, they offer a balance of flexibility and ease of use. Both non-synchronous converters (integrated high-side FET and external diode) and synchronous converters (integrated high-side and low-side FETs) simplify the design process by reducing external component count. At the same time, an external inductor allows you the flexibility to optimize your power supply for efficiency, size, or cost. No matter what your application is, we have a DC/DC buck converter and design tools to help you address your power supply design challenges.

 

2 KWD Add to Cart

Ultra-Small Size DC-DC Step Down Power Supply Module 3A Adjustable

This DC/DC step-down voltage converter is based on MP2303, it converts input voltage between 4.5V and 28V into a smaller voltage between 0.8V and 8V, capable of driving a 3A load with excellent line and load regulation.

Note: Input must be >1.5V higher than output! The chip will get to high temperature protection mode when it work at a high-power conversion, without any cooling, it is able to output 3A current at 5V. But at higher output voltage, the current output capacity is lower than 3A, approx 2A.

 

0.5 KWD Add to Cart

Ultrasonic Range Finder - LV-MaxSonar-EZ1-SEN-00639

This is the fantastically easy to use sensor from Maxbotix. We are extremely pleased with the size, quality, and ease of use of this little range finder. The serial interface is a bit odd (it's RS232 instead of standard TTL), but the PWM and Analog interfaces will allow any micro to listen easily enough. The sensor provides very accurate readings of 0 to 255 inches (0 to 6.45m) in 1 inch increments with little or no dead zone!

15 KWD Add to Cart