Top Sellers

Shop

2 Relay module

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).

It has a 1x4 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the 2 relays. The pins are marked on the PCB:

  • GND - Connect 0V to this pin.
  • IN1 - Controls relay 1, active Low! Relay will turn on when this input goes below about 2.0V
  • IN2 - Controls relay 2, active Low! Relay will turn on when this input goes below about 2.0V
  • VCC - Connect 5V to this pin. Is used to power the opto couplers
3.5 KWD Add to Cart

3-80cm Detection Range adjustable E18-D80NK Infrared Obstacle Avoidance Photoelectric Sensor Proximity Switch

Description:

This is a set of transmitter and receiver in one of the photoelectric sensor. The detection distance can be adjusted upon request. The sensor has a detection distance and the visible light interference, cheap, easy to assemble, easy to use features of robot obstacle avoidance, and assembly line piece can be widely used in many occasions.

Applications:

1, A production line goods automatic counting device

2, multi-functional reminder

3, the maze robot

3.00 KWD Add to Cart

3-way tracking module hunt modules For ARDUINO robot accessories Tracker sensor v1.0

1,3 road tracking sensors, the robot making necessary

2, the use of infrared light detection, anti-jamming capability, using CTRT5000 sensor, adjustable sensitivity, stable performance

3, the operating voltage 5V, output low white lines

4, exquisite workmanship, with lights, a fixed bolt hole for easy installation

2 KWD Add to Cart

3.2 inch TFT color LCD module 320X480 Ultra HD LCD screen Support R3 MEGA2560 development board

QDM320DBXNT8357RA module is 3.2" TFT LCD with 262K color 320 x  480 resolutions. The controller of this LCD module is HX8357B, it supports 16-wires DataBus interface. Moreover, this module includes the 5V-3.3V power conversion circuit and Level conversion circuit, This Module can Directly inserted into the Arduino Mega2560 Board ,it also includes the SD card socket and SPI FLASH circuit.

  • Support Arduino Mega2560 Directly inserted.
  • With Full-angle IPS TFT panel.
  • OnBorad level conversion chip for 5V/3.3V MCU.
  • Compatible with 3.3/5V operation voltage level.
  • Compatible with Arduino-Series development Board.
  • Compatible with UTFT / UTFT_Buttons /Utouch Library for arduino.
  • Provided 12-examples with Arduino ,3-examples with STM32.
  • With SD Card Socket.
  • With SPI FLASH circuit.
5 KWD Add to Cart

300 Degree Rotation Sensor Rotation Angle Potentiometer

300 Degree Rotation Sensor Rotation Angle Potentiometer for UNO Rev3 Micro Controller

2.5 KWD Add to Cart

36 in one Arduino Sensor kit

This is an Arduino sensor learning kit developed by Keyestudio. We bring together 36 basic sensors and modules, aiming for the convenience of its learning for starters. Inside this box, there are digital and analog sensors and also some special modules such as ultrasonic, bluetooth,, acceleration modules etc. For each module, there is clear connection diagram and sample code. So even if you are totally new at this, you can get started easily. The sample codes for this sensor kit are based on ARDUINO because it's open source and easy. And if you are good at this, you can also apply this kit to other MCU development platform, such as 51, STM32, Raspberries Pi. The working principle is pretty much the same. Now, let us embrace this fascinating world of ARDUINO and learn together!
 

20 KWD Add to Cart

37 in one Arduino sensor kit-Keyes

VEEROBOT 37 in 1 Sensor Kit for the Arduino system contains 37 individual modules which can be used to create many interesting experiments using the Arduino, AVR microcontrollers, PIC microcontrollers, Raspberry Pi etc. All of the modules packed in an organized box. A great package for Arduino experiments or as a basis for a larger project.

 

30.00 KWD Add to Cart

3D pen - RED

3D pen

A 3D printing pen is like a handheld 3D printer. It uses the same kind of heating element and extruder that you would find on a desktop 3D printer. But instead of being controlled with computer software and motors, you guide the printer head by hand.

How Does it Work?

Like all 3D printing devices, a 3D printing pen works by heating a plastic filament to its melting point and forcing it through an extruder tip. This is very similar to how a hot glue gun works. The melted plastic is very soft and can be fused onto a surface or worked into any shape that you want. Once the melted plastic leaves the tip, it begins to quickly cool down. After a few seconds, the plastic hardens and holds whatever shape you have worked it into.

What Can You Do With a 3D pen?

These pens allow you to effectively draw with plastic. You can work the plastic into just about any shape and apply it to most surfaces. You can use it to add raised decorative designs to everyday objects. With practice, you can even make 3D drawings in empty space. These pens can also be used to modify and repair other 3D printed objects.

30 KWD Add to Cart

3D pen -makers academy-Black

3D pen

A 3D printing pen is like a handheld 3D printer. It uses the same kind of heating element and extruder that you would find on a desktop 3D printer. But instead of being controlled with computer software and motors, you guide the printer head by hand.

How Does it Work?

Like all 3D printing devices, a 3D printing pen works by heating a plastic filament to its melting point and forcing it through an extruder tip. This is very similar to how a hot glue gun works. The melted plastic is very soft and can be fused onto a surface or worked into any shape that you want. Once the melted plastic leaves the tip, it begins to quickly cool down. After a few seconds, the plastic hardens and holds whatever shape you have worked it into.

What Can You Do With a 3D pen?

These pens allow you to effectively draw with plastic. You can work the plastic into just about any shape and apply it to most surfaces. You can use it to add raised decorative designs to everyday objects. With practice, you can even make 3D drawings in empty space. These pens can also be used to modify and repair other 3D printed objects.

30 KWD Add to Cart

3D pen -makers academy-Blue

3D pen

A 3D printing pen is like a handheld 3D printer. It uses the same kind of heating element and extruder that you would find on a desktop 3D printer. But instead of being controlled with computer software and motors, you guide the printer head by hand.

How Does it Work?

Like all 3D printing devices, a 3D printing pen works by heating a plastic filament to its melting point and forcing it through an extruder tip. This is very similar to how a hot glue gun works. The melted plastic is very soft and can be fused onto a surface or worked into any shape that you want. Once the melted plastic leaves the tip, it begins to quickly cool down. After a few seconds, the plastic hardens and holds whatever shape you have worked it into.

What Can You Do With a 3D pen?

These pens allow you to effectively draw with plastic. You can work the plastic into just about any shape and apply it to most surfaces. You can use it to add raised decorative designs to everyday objects. With practice, you can even make 3D drawings in empty space. These pens can also be used to modify and repair other 3D printed objects.

30.00 KWD Outof Stock

3D pen -makers academy-Grey

3D pen

A 3D printing pen is like a handheld 3D printer. It uses the same kind of heating element and extruder that you would find on a desktop 3D printer. But instead of being controlled with computer software and motors, you guide the printer head by hand.

How Does it Work?

Like all 3D printing devices, a 3D printing pen works by heating a plastic filament to its melting point and forcing it through an extruder tip. This is very similar to how a hot glue gun works. The melted plastic is very soft and can be fused onto a surface or worked into any shape that you want. Once the melted plastic leaves the tip, it begins to quickly cool down. After a few seconds, the plastic hardens and holds whatever shape you have worked it into.

What Can You Do With a 3D pen?

These pens allow you to effectively draw with plastic. You can work the plastic into just about any shape and apply it to most surfaces. You can use it to add raised decorative designs to everyday objects. With practice, you can even make 3D drawings in empty space. These pens can also be used to modify and repair other 3D printed objects.

30.00 KWD Outof Stock

3D Pen Fiament

3D Pen PLA filaments pack we are providing are of good quality. All of the colors printed just fine without having to do any major temperature adjustments in the 3d pen .The same settings used for PLA normal filaments . the print will be of good quality.

  • The diameter is 1.75mm . which is normally used in the 3D pen and 3D printers 
  • Total16 different colors packed in this vacuum package.
  • Each color length is 6 meters
6.00 KWD Add to Cart

3D printer filament-PLA -200g-White

Adopting high-purity materials instead of those waste recycled materials, these 3D filament is safe to use without toxic and can be used smoothly without clogging.
Perfect printing effect -- the model printed out has charactics of smooth surface, bright color, high tenacity and light weight.
As a kind of widely used thermoplastic engineering plastics, the PLA filament is applicable for machinery parts, models, electronics, instruments and other industrial field.

 

5.00 KWD Add to Cart

3D wox 1-open filament

The one for everyone!

OPEN SOURCE FILAMENT

You may select the Open Material mode and discover further 3D printing possibilities or choose Sindoh filament to ensure the consistency in print quality.
 

RELIABLE FLEXIBLE BED

Just peel it.The flexible metal bed plate of 3DWOX 1 enhances both safety and bed adhesion.
Think of what can be achieved with the flexibility and heating It is a revolution.

HEPA FILTER

High Efficiency Particulate Air (HEPA) filter, commonly used in air purifiers, is designed to arrest very fine particles effectively.
The 3DWOX 1 comes with HEPA filter that will absorb any dust created during printing.
Let 3DWOX 1 assist you create a healthy printing environment for your loved ones.

ENJOY THE SILENCE

Silence is the most pleasing sound of 3D printing.
With its library noise level of 40 dB(A), you can now enjoy doing all kinds of things that require silence such as reading a book or taking a nap.

FULLY AUTOMATED LOADING

At Sindoh, we believe 3D printing should be easy. On many 3D printers today, the process of changing filament is a difficult procedure which involves cutting, retrieving, and placing into small openings, all manually performed by the user. 
This makes the 3D printing a difficult experience, so with 3DWOX 1, we keep it simple.
Just insert the cartridge and you’re done.

REMOTE MONITORING

3D printing of intricate and large objects can be time consuming.
At Sindoh, we believe in making the 3D printing experience easy so we have integrated a camera and LED lighting into 3DWOX 1 for remote monitoring of the printing process day or night.
Simply install the 3DWOX mobile app on your phone or tablet to watch the print progress from the convenience of your living room.

ASSISTED BED LEVELING

One of the keys to printing perfect prints every time is ensuring the print bed is perfectly leveled.
You wouldn’t want your house built on a slanted surface and the same is true for 3D printing.
Bed leveling is important but with 3DWOX 1, we make it simple.
The printer does the work and displays clear instructions to set the perfect level.

740 KWD Add to Cart

3V 1225 cell battery coin type

These batteries are suitable for watches, calculators, cameras, games, lighters, and other small electronic appliances. Just make sure this is the exact size battery you're looking for. These batteries come in the original retail packaging.

1.5 KWD Add to Cart