The EBot IR sensor  scans IR signals in specific frequency ranges defined by standards and converts them to electric signals on its output pin (typically called signal pin). The IR signals are mainly used for transmitting commands over the air on short distances (typically few meters) like what you’ve already worked with on TV remote controls or other similar electronic devices.

  It only requires three connections. When it detects an obstacle within range it will send an output low.

Using Ebot IR sensors, Many projects can be done.

Pin, Control Indicator Description
Vcc 3.3 to 5 Vdc Supply Input
Gnd Ground Input
SIgnal Output that goes low when obstacle is in range
Power LED Illuminates when power is applied
Obstacle LED Illuminates when obstacle is detected
Distance Adjust Adjust detection distance. CCW decreases distance.
CW increases distance.
IR Emitter Infrared emitter LED
IR Receiver Infrared receiver that receives signal transmitted by Infrared emitter.
  • 3 wire system as like other Ebot sensor .