Sparkfun IOT starter kit
Blynk is an easy to use app builder that allows users to add a variety of buttons, sliders, graphical displays and even RGB controllers to their phone. The SparkFun Blynk Board is specially designed to work with the ‘widgets’ within the Blynk mobile app to create your next IoT project. Monitor local weather conditions, control LEDs from your phone, even send a tweet when it’s time to water your plants!
The SparkFun IoT Starter Kit with Blynk Board is a great way to gain a solid introduction to the world of Internet of Things (IoT) technology without any difficult programming. With this kit you will be able to get your Blynk Board connected and, by utilizing the pre-loaded projects, use diverse set of components to build an array of web- and phone-connected projects.
Every Blynk Board comes fully programmed and also includes a Blynk subscription code card (15k Energy at a $10 value), which will be needed to connect the Blynk Board to your Blynk account. Simply connect to a Wi-Fi signal and you are ready to use this starter kit! Getting started with your Blynk Board and getting it connected to the Blynk App on your iOS or Android device is a breeze. Once you’ve played with the ZeRGBa (a festively colored zebra 'widget' that can change the color of the on-board RGB LED) checkout our step-by-step project guide with detailed images on how to add and control the large selection of widgets within Blynk.
The kit does not require any soldering and is recommended for anyone with a drive to learn more about Blynk and its uses. So if you are looking for a new challenge or a way to get in on the IoT craze, check out the SparkFun IoT Starter Kit with Blynk Board!
- SparkFun Blynk Board - ESP8266
- SparkFun Soil Moisture Sensor (with Screw Terminals)
- Magnetic Door Switch Set
- Sub-Micro Size Servo
- Slide Pot - X-Large (10k Linear Taper)
- Toggle Switch
- Mini Photocell
- Red, Blue, Yellow, and Green LEDs
- Pocket Screwdriver Set
- Resistor 10K Ohm 1/6th Watt PTH - 20 pack (Thick Leads)
- Resistor 330 Ohm 1/6 Watt PTH - 20 pack (Thick Leads)
- Alligator Test Leads - Multicolored (10 Pack)
- Jumper Wires - Connected 6" (M/M, 20 pack)
- USB microB Cable - 6 Foot
- Wall Charger - 5V USB (1A)
SparkFun Inventor's Kit -Arduino Genuino
The SparkFun Inventor’s Kit for the Genuino 101® board is a great way to get started with programming and hardware interaction with embedded electronics using the Intel® Curie-based Genuino 101 board.
This SIK includes everything you need to complete 21 circuits that will teach you how to control and read the on-board and external sensors, control the Genuino 101 board through your phone, detect and analyze different sounds, and much more. Don’t worry; you won’t need any previous programming or electronics experience to use this kit. The philosophy behind this kit is that anyone can (and should) play around with cutting-edge electronics. After using this 101 SIK, you’ll have the know-how to start creating your own projects and experiments. From building robots and game controllers to IoT and data logging, the world will be your oyster.
The online Experiment Guide for the Genuino 101 board contains step-by-step instructions for how to connect each circuit with the included parts. Full example code is provided and explained, and even includes troubleshooting tips if something goes wrong.
The kit does not require any soldering and is recommended for anyone comfortable reading code libraries and those looking for an alternative to the original SparkFun Inventor’s Kit.
Tutorials and examples:
Sparkfun Sensor kit
Do you have a good understanding of various sensors or need a variety of them for a project? This kit includes a sensor for just about every job. With everything included in this kit, you’ll be able to sense gesture, humidity, temperature, motion, touch, sound, altitude, acceleration and more! These are some of our favorite sensors from each category.
This version of the kit has received a complete overhaul! Check out the Kit Includes section below for a complete list of what is included in this kit to find out what has changed.
This huge assortment of sensors makes an amazing gift for that very special electronics enthusiast in your life!
SparkFun Essential Sensor Kit
Want to start playing with sensors, but don’t know where to begin? This kit includes a variety of basic sensors for any beginner or experienced programmer. With everything included in this kit, you’ll be able to sense acceleration, force, vibration, Infrared light, ambient light, temperature, and more! These are some great basic sensors from varying categories.
SparkFun ProtoShield Kit
The SparkFun ProtoShield Kit lets you customize your own Arduino shield using whatever circuit you can come up with and then test it to make sure everything is working the way it should! The SparkFun ProtoShield Kit is based off the Arduino R3’s footprint that allows you to easily incorporate it with favorite Arduino-based device.
One of our favorite features with this version of the ProtoShield Kit is the solderable-like breadboard prototyping area! Half of this area was designed with a breadboard in mind. On the underside of the shield you will be able to see open jumper pads between each through hole to make a connection like a breadboard. Once you add a component, simply add a solder jumper between holes to make a connection. For those that prefer the standard prototyping pads, we left the other side (near the BlueSMiRF and Serial UART ports) as is.
We have also moved the prototype testing components (those used to make sure your circuit works effectively) off of the "mainland" of the shield and onto a ProtoSnap styled, removable PCB. On this test area you will find soldering areas for the two yellow 3mm LEDs (as well as pins to control and power them), two 330 Ohm resistors, a 10K Ohm resistor, and a pushbutton.
Note: Since this product is a kit, assembly and a basic knowledge of soldering will be required. The SparkFun ProtoShield Kit does not come pre-assembled.
SparkFun RFID Starter Kit (Genuine)
This it the SparkFun RFID Starter Kit, an all-in-one kit that offer everything you need to get your next RFID project off the ground. This kit includes our USB RFID Reader, ID-12LA RFID module, and two 125kHz RFID cards. We've done away with the annoying clamshell and now offer this in the same type of box as the rest of our kits.
The RFID USB Reader is a simple to use, USB to serial base unit for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your choice at 9600bps 8N1, then scan your 125kHz ID tag and the unique ID will be shown on the screen. The unit is based on a FTDI chip and comes with a read LED and buzzer.
The ID-12LA is a very simple RFID reader module. It plugs directly into the USB reader to allow you to read RFID tags through a USB connection. Power the module, hold up a card, and get a serial string output containing the unique ID of the card.
Raspberry Pi 3 B+ Starter Kit (Genuine)
There's a lot of Raspberry Pi information going around lately. Whether it’s Pi 3, Zero, Zero W or one of the many previous iterations, any forum will have thousands of people giving all the answers possible to a problem. Though most methods work for any version, it can be tough to decide which information to choose. The Raspberry Pi 3 B+ Starter Kit is a great way to gain a solid introduction to the small, credit-card-sized computer. With this kit you will be able to get your Raspberry Pi 3 B+ connected through our SparkFun Pi Wedge to a breadboard and, by utilizing the RPi's 40-pin GPIO, will be able to control pushbuttons, LEDs and a host of user-created circuits.
The online guides and tutorials we will be providing for the kit and the full release of the RPi 3 B+ will contain step-by-step instructions for how to set up your Raspberry Pi and how to program it in a variety of languages.
This kit will not require any soldering and is recommended for anyone with a drive to learn more about the Raspberry Pi and its programming. So if you are looking for a new challenge or away to get in on the RPi craze, check out the Raspberry Pi 3 B+ Starter Kit!
EBOT Full kit
EBot is a DIY ecosystem developed for students, kids, artists, and robotics enthusiasts to learn, explore and build working prototypes through experiments and games. Entire system includes an electronic development board with wide range of compactable sensors, graphical programming software based on Google Blockly, bunch of wheels, gears, motors, shafts and plastics, books and study materials that help to learn all basic concepts of mechanical designing, programing and electronic prototyping.
For tutorials, Mobile application,PC application on various platforms like Windows, Android,IOS and linux Know more......
Bloxels- Build Your Own Video Game
Build your own video games with Bloxels! The innovative video game creation platform makes concepting and execution easy. Watch your game world come to life as you create and animate play spaces, characters and objects because you are the artist, game designer, storyteller, programmer, publisher AND player! The physical pieces in the Bloxels game set work with the free Bloxels Builder app to digitize your creations, put them on-screen and make them playable. Just download the FREE Bloxels Builder app to your smart device (not included) to get started. Then use the 13 x 13 Gameboard and colored blocks to design a room, create the art for game elements and bring your heroes and villains to life. When creating game rooms, each color in your design represents a different element, like terrain, water or a hazard. When working on art, the blocks represent the pixelated image. There are eight different colors and 320 blocks for lots of endless possibilities. Once you have finished adding blocks, snap a picture with the "in-app camera" to digitize your creation. Go from blocks to "bloxels" instantly! On-screen test your game, edit layouts and change the colors of your art assets. The process of building the game is easy to follow, with instructions and tutorials to help beginners. From creating the map of your game to animating your characters to adding power-ups to full-on playing, you make the decisions and produce the work. When your game is ready for the world to play, post it to the Bloxels Infinity Wall to share. Fellow 13-bit builders can play your game and buy your creations to use in their own games, earning you coins. Coins you earn can be used to buy content from other players to remix within your game in new and creative ways. How will your game evolve? How will it start? What story will you tell? Get ready to get in the game -- video game development -- with Bloxels. Includes Gameboard, 320 blocks, challenge poster and instruction manual; the Bloxels Builder app is downloadable for free.
RC DIY Block Building Drone
The RC DIY Block Building Drone is the perfect starting block to get your child's science, technology, information sciences and mathematics skills stimulated and sharpened. The perfect constructive toy for a child to spend time with, this drone is fully customizable to create an enthralling experience of unparalleled edutainment. Featuring 360-degree flips, return function, 20-meter range, LED lights and a flight time of up to 8 minutes, this drones price makes its affordability the ultimate must-have for any parent looking to invest in their children's engineering aptitude.
Makey Makey Standard Kit
You may be the greatest living banana-pianist, but how will you ever know if you don’t make yourself a banana piano? Good news, that project and countless others are easier than you think they are with MaKey MaKey.
Using the Makey Makey you can make anything into a key just by connecting a few alligator clips. The Makey Makey Classic by JoyLabz is an invention kit that tricks your computer into thinking that almost anything is a keyboard. This allows you to hook up all kinds of fun things as an input. For example, play Mario with a Play-Doh keyboard or piano with fruit!
The Makey Makey Classic uses high-resistance switching to detect when you’ve made a connection even through materials that aren’t very conductive (like leaves, pasta or people). This technique attracts noise on the input, so a moving window averager is used to lowpass the noise. The Makey Makey can also act like a keyboard or mouse. There are six inputs on the front of the board, which can be attached to via alligator clipping, soldering to the pads, or any other method you can think of. There are another 12 inputs on the back, six for keyboard keys and six for mouse motion, which you can access with jumpers via the female headers.
Tutorials and examples:
Rover 5 Robot Platform (Genuine)
If you're looking for a chassis base for your next robot, look no further than the Rover 5. The Rover 5 uses 4 independent motors, each with a hall-effect quadrature encoder and gearbox. The entire gearbox assembly can be rotated at 5 degree increments for different clearance configurations. You can even replace the tank treads with traditional wheels.
This isn't a wimpy or flimsy robot base. Weighing in at over 2.5 pounds without batteries, this base is heavy duty and can drive over quite a bit. Check the manual below for dimensional drawings.
36 in one Arduino Sensor kit
This is an Arduino sensor learning kit developed by Keyestudio. We bring together 36 basic sensors and modules, aiming for the convenience of its learning for starters. Inside this box, there are digital and analog sensors and also some special modules such as ultrasonic, bluetooth,, acceleration modules etc. For each module, there is clear connection diagram and sample code. So even if you are totally new at this, you can get started easily. The sample codes for this sensor kit are based on ARDUINO because it's open source and easy. And if you are good at this, you can also apply this kit to other MCU development platform, such as 51, STM32, Raspberries Pi. The working principle is pretty much the same. Now, let us embrace this fascinating world of ARDUINO and learn together!
37 in one Arduino sensor kit-Keyes
VEEROBOT 37 in 1 Sensor Kit for the Arduino system contains 37 individual modules which can be used to create many interesting experiments using the Arduino, AVR microcontrollers, PIC microcontrollers, Raspberry Pi etc. All of the modules packed in an organized box. A great package for Arduino experiments or as a basis for a larger project.