Shop

Sound Detection Module Sound Sensor Voice Detector LM386 Intelligent Sensor

Overview

Onboard audio power amplifier LM386
Audio signal gain up to 200
Adjustable voltage amplitude for analog output
Signal output indicator

 

3.5 KWD Add to cart

MP3 Trigger

Make some noise with your next project! The MP3 Trigger board is built to make MP3 sound integration easier than ever. The board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a full-duplex serial control port that provides full transport control, remote triggering for up to 256 tracks, and fast real-time volume control. MP3s are stored on FAT16 formatted SDSC or FAT32 formatted SDHC micro-SD flash memory cards. In addition, optimized code can achieve 192Kbps stereo playback from a wider range of cards.

The heart of the MP3 Trigger board is the Cypress PSoC CY8C29466-24SXI microcontroller which serves up MP3 data to a VLSI VS1063 audio codec IC. This version also supports an optional initialization file that can be used to set the serial port baud rate as well as to reprogram any of the 18 trigger inputs to alternate functions, including random and sequential track selection, transport controls and even volume up/down. Each conventional trigger can be set to either allow immediate restarts, or to lock out restarts if audio is playing. Also, a new trigger filename convention provides greater flexibility in naming your MP3 tracks and makes file management easier.

There is also a “Quiet Mode” feature that can be enabled via the serial control port. In this mode, the trigger inputs don’t start tracks directly, but instead produce a serial message indicating which triggers were activated. A host microcontroller can thus monitor the trigger inputs and then start any track or sequence of tracks via the serial control port, making the triggers much more flexible.

This version of the MP3 Trigger includes firmware that supports the use of an initialization file on the microSD card that can be used to change the serial baud rate, as well as to repurpose any of the 18 trigger inputs to alternate functions, such as random and sequential triggers, navigation controls and even volume controls. In addition, a restart lockout option can be used to prevent any trigger from starting a track if audio is already playing. Using these features, custom applications can often be implemented without the use of a separate microcontroller.

Note: This product is a collaboration with Robertsonics. A portion of each sales goes back to them for product support and continued development.

Hook Up Guide

Support Page

Videos:

SparkFun MP3 Trigger Robot Tutorial with DJ Sures

Mp3 trigger demo

 

25.00 KWD Outof Stock

Open smart serial MP3 player with 8 ohm 1 W speaker + Micro SD card

The module is a kind of simple MP3 player device which is based on a high-quality MP3 audio chip. It can support 8k Hz ~ 48k Hz sampling frequency MP3 and WAV file formats. There is a TF card socket on board, so you can plug the micro SD card that stores audio files. MCU can control the MP3 playback state by sending commands to the module via UART port, such as switch songs, change the volume and play mode and so on. You can also debug the module via USB to UART module. It is compatible with Ar duino/AVR/ARM/PIC.

 

6 KWD Add to cart

Sparkfun Voice recognition module-Elechouse

ELECHOUSE Voice Recognition Module is a compact and easy-control speaking recognition board. 
This product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all. 
Max 7 voice commands could work at the same time. Any sound could be trained as command.
Users need to train the module first before let it recognizing any voice command. 
This board has 2 controlling ways: Serial Port (full function), General Input Pins (part of function). 
General Output Pins on the board could generate several kinds of waves while corresponding voice command was recognized. Product List 
Voice Recognition Module x1 
Microphone x1 

27 KWD Add to cart

Voice Sound board recording module(SK0114442)

This is ISD1820 Sound/Voice Board Recording Module. The ISD1820 Sound/Voice Board Recording is 100% Brand new and high-quality Board ISD1820 chip with an Onboard microphone, you can direct recording of About 10 seconds voice recording. High-quality, natural voice Restore can be used as a loudspeaker module With a loop playback, jog playback, single-pass playback.

The chip pin leads, through the microcontroller to control operation.

This voice record/playback device is based on the ISD1820 chip, which can record/playback multiple-message. It can offer true single-chip voice recording, non-volatile storage, and playback capability for 8 to 20 seconds. For the sampling rate of 3.2KHz, it can record for the total duration of 20 seconds.

5 KWD Add to cart

Opensmart serial mp3 player + Micro SD card

The module is a kind of simple MP3 player device which is based on a high-quality MP3 audio chip. It can support 8KHz~48KHz sampling frequency MP3 and WAV file formats. There is a TF card socket on board, so you can plug the micro SD card that stores audio files. MCU can control the MP3 playback state by sending commands to the module via UART port, such as switch songs, change the volume and play mode and so on. You can also debug the module via USB to UART module. It is compatible with Arduino/AVR/ARM/PIC.

6 KWD Add to cart

SparkFun MP3 Player Shield + Micro SD card

The SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill microSD card, thus giving you the ability toadd music or sound effects to any project. With this board you can pull MP3 files from an microSD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player! The MP3 Shield utilizes the VS1053B MP3 audio decoder IC to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis.

The VS1053 receives its input bitstream through a serial input bus (SPI). After the stream has been decoded by the IC, the audio is sent out to both a 3.5mm stereo headphone jack, as well as a 2-pin 0.1" pitch header.

13 KWD Add to cart

Serial MP3 Music Player Module + Micro SD card

  • It's an add on board that needs an arduino or some other micro controller to play thru
  • Support file format:MP3/WAV
  • Support Micro SD card, Micro SDHC Card
  • Support sampling frequency (kHz):8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48
  • UART TTL serial control playback mode, baud rate is 9600bps. 30 class adjustable volume
8 KWD Add to cart

Mini MP3 Player Module with Simplified Output Speaker + Micro SD card

The MP3-TF-16P Player For Arduino is a small and low price MP3 module with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.

1.5 KWD Add to cart