Shop

This DIY Transparent Motor Smart Robot Car Chassis Kit comes with quality product. The kit is easy to assemble/disassemble. Now youcan attach the sensors  and program with EBOT Blockley

If you're looking for a chassis base for your next robot, look no further than the Rover 5. The Rover 5 uses 4 independent motors, each with a hall-effect quadrature encoder and gearbox. The entire gearbox assembly can be rotated at 5 degree increments for different clearance configurations. You can even replace the tank treads with traditional wheels.

This isn't a wimpy or flimsy robot base. Weighing in at over 2.5 pounds without batteries, this base is heavy duty and can drive over quite a bit. Check the manual below for dimensional drawings.

This product is a DC gear motor +1 wheel = 1 piece

Package Included:

• 2xsmart Car Robot Plastic Tire Wheel

• 2x DC Gear Motor

Want to make a hexapod walker? Maybe you're making a piece of art with tons of moving parts, or you need to drive a ton of LEDs with precise PWM output. Your microcontroller has a limited number of PWM outputs, and you find yourself running out! Not with the Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface. With this pwm and servo driver breakout, you can control 16 free-running PWM outputs with just two pins! Need to run more than 16 PWM outputs? No problem. Chain together up to 62 of these beauties for up to an outstanding 992 PWM outputs.

EBot is a DIY ecosystem developed for students, kids, artists, and robotics enthusiasts to learn, explore and build working prototypes through experiments and games. Entire system includes an electronic development board with wide range of compactable sensors, graphical programming software based on Google Blockly, bunch of wheels, gears, motors, shafts and plastics, books and study materials that help to learn all basic concepts of mechanical designing, programing and electronic prototyping.

For tutorials, Mobile application,PC application  on various platforms like Windows, Android,IOS and linux  Know more......

4A TB6600 Stepper Motor Driver Controller

9~42V TTL 16 Micro-Step CNC 1 Axis 2 or 4 Phase of Stepper Moto 42, 57, 86

NOTE:

It is Updated version of TB6600 4A Stepper Motor Driver the practicability of this type is same to TB6600 4A driver, But inside the apperance of it is different from TB6600 4A Stepper Motor Driver.

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60°

Futaba S3003 Servo Motor-360 Degree

EBot Pro is an Arduino based microcontroller board that can be programmed through EBot Blocky Visual programing IDE. A number of compatible sensors are also available.

Smart , Easy and Innovative

Ebot is the smartest way of prototyping. Graphical programming, fully compactable sensors and mutually snapable plastics make your inventions faster, innovative and simple. Take your board. Attach sensor and plastic bricks. Program it using graphical software. Your Robot is READY !!

No more soldering, no more complicated wiring, no more programming errors, and no more searching for suitable mechanical parts.

Open and Universal

Ebot is based on most popular open source platform Arduino and Google’s Blockly. Users can refer, modify and improve our firmware and hardware. All the sensors and nodes are based on universal three pin connector, including VCC,GND, and SIGNAL. This makes the system compactable with a wide verity of existing sensors.

EBot Blockly

Ebot blockly is graphical programming software used to program Ebots. This software is based on Google Blockly. User can drag and drop nodes to workspace, modify its parameters and can finish programing. Nodes includes input devices, output devices, code flow control elements like delay, logical statements like if and many more.

Smart phone App

Ebot Blockly is also available in smartphones with same user interface as desktop software. User can drag and drop blocks and press ‘Play’ button to run the code. There is no need of compilation or waiting to download code. EBot is smart enough to work without compilation.

Multimedia nodes are available here as well. This helps user to open and control audio, video and images in the phone in synchronous with Ebot.

Data Lab

DataLab is the graphical visualisation of real time sensor values. Both graph and gauge representations are available. Sensor data can be saved as an excel file as well. This even available in smartphone version.

Live Control

Live control is a part of EBot desktop application, that helps user to control Servo motors, RGB LEDs, Buzzers, etc.. in real time . User can use UI controls in the software to change parameters like angle of servo, colour of RGB led and so on. These changes will be reflected in the hardware instantly.

There is an option to save different states (that includes different values for servos, buzzers and LEDs) and to loop through these saved states with user defined delays. This makes programming a Humanoid or Robotic Arm simple.

Wide range of Nodes

Ebot System comes with a wide range of sensors with its own 'blocks' in Ebot blockly. All the sensors including LCD and color sensors are developed with three pin connectors that can be directly plugged in to the Ebot motherboard.

Node Maker

These nodes are pretty enough to finish most ofyour projects. But you can really do more. Node maker wizard helps you to make your own nodes with your own libraries and code. Node maker is versatile and flexible enough to make almost all kind of available Arduino compactable sensors and more.