Shop

LED - Basic Yellow 5mm (5 Nos)

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays.

This is a very basic 5mm LED with a yellow lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.

0.250 KWD Add to cart

LED - Basic Green 3mm (5 Nos)

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays.

This is a very basic 5mm LED with a green lens. It has a typical forward voltage of 3.4V and a rated forward current of 30mA.

0.250 KWD Add to cart

LED - Basic Blue 5mm (5 Nos)

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays.

This is a very basic 5mm LED with a blue lens. It has a typical forward voltage of 3.4V and a rated forward current of 30mA.

0.250 KWD Add to cart

Sparkfun-Solar Panel - 3.5W

Have a project that needs some good power? Do you like free power provided by our friend, Mr. Sun? Check out this high quality, high output, fully enclosed solar panel with a nice solid aluminum/plastic frame. The panel is capable of 3.5 watts in the open sun with a peak power output around 6V at 615mA.

The termination is equipped with a 3.5mm x 1.1mm barrel plug and 5.5mm x 2.1mm adapter on a 22cm (8in) cable making the panel able to mate directly with many of our development boards. Each panel also features monocrystalline high efficiency cells at 19% with a waterproof urethane coating with hard-board backing. With robust sealing for out door applications this solar panel is incredibly durable and reliable!

Includes:

  • 1x Solar Panel - 3.5W
  • 1x Barrel Plug Adapter - 3.5mm to 5.5mm
21.00 KWD Add to cart

Ebot USB Micro cable

This USB cable is very common nowadays.These cables are  found on newer mobile devices such as cellphones, GPS units, PDAs and digital cameras. Micro-USB B offers a connection physically smaller in size to a USB Mini-b, while still supporting the high speed transfer rate of 480 Mbps and On-The-Go features. The connection can be easily identified by its black-colored receptacle and compact 5 pin design.

1.500 KWD Add to cart

Brushed Electronic Speed Controller ESC with Brake

ESC 10A Brushed Reverse Motor Speed Controller For RC 1/16 1/18 Car Boat Brake 2Khz

2.5 KWD Add to cart

HC-SR04 Ultrasonic Sensor

HC-SR04 distance sensor is commonly used with both microcontroller and microprocessor platforms like Arduino, ARM, PIC, Raspberry Pie etc. The following guide is universally since it has to be followed irrespective of the type of computational device used.

  Power the Sensor using a regulated +5V through the Vcc ad Ground pins of the sensor. The current consumed by the sensor is less than 15mA and hence can be directly powered by the on board 5V pins (If available). The Trigger and the Echo pins are both I/O pins and hence they can be connected to I/O pins of the microcontroller. To start the measurement, the trigger pin has to be made high for 10uS and then turned off. This action will trigger an ultrasonic wave at frequency of 40Hz from the transmitter and the receiver will wait for the wave to return. Once the wave is returned after it getting reflected by any object the Echo pin goes high for a particular amount of time which will be equal to the time taken for the wave to return back to the sensor.

The amount of time during which the Echo pin stays high is measured by the MCU/MPU as it gives the information about the time taken for the wave to return back to the Sensor. Using this information the distance is measured.

Applications

  • Used to avoid and detect obstacles with robots like biped robot, obstacle avoider robot, path finding robot etc.
  • Used to measure the distance within a wide range of 2cm to 400cm
  • Can be used to map the objects surrounding the sensor by rotating it
  • Depth of certain places like wells, pits etc can be measured since the waves can penetrate through water

 

1.500 KWD Add to cart

Ebot DC motor

Ebot Dc motor is specially designed DC motor compatible to Ebot System.User can change the speed and  torque as per their requirement regarding the project.It have 2 pin connector(For + and -) which suits the motor Connecting pin on the Ebot Controller board.

Also there is inbuilt connector pins for attaching the motor to the Ebot plastic bricks. So that the user can build mechanical systems .

 

3 KWD Add to cart

SparkFun Blynk Board - ESP8266

Blynk is an easy to use app builder that allows users to add a variety of buttons, sliders, graphical displays and even RGB controllers to their phone. The SparkFun Blynk Board is specially designed to work with the ‘widgets’ within the Blynk mobile app to create your next IoT project. Monitor local weather conditions, control LEDs from your phone, even send a tweet when it’s time to water your plants! Every Blynk Board comes fully programmed and also includes a Blynk subscription code card (15k Energy at a $10 value), which will be needed to connect the Blynk Board to your Blynk account, connect to a Wi-Fi signal and you are ready to start Blynking! You’ll be controlling the Blynk Board from half way around the world in no time.

On board every Blynk Board is the economic yet powerful ESP8266 framework that will allow you to connect to most 2.4GHz WiFi networks, that are either open (no password) or protected with WPA, WPA-2, or WEP authentication. The Blynk Board interfaces with the outside world using input/ouput (I/O) “pins” that can either control real-world objects, like motors or LEDs, or read in values from sensors (like light or position). Each of the Blynk Board’s pins are accessible via the large, metal-encircled holes on the edge of the board. These large holes are designed to interface with alligator clip cables – a staple interface cable for beginner and advanced electrical engineer alike. During setup, the RGB LED on the Blynk Board will be your window into its soul. The board uses this multi-colored LED to indicate all sorts of status modes including how to identify which board is yours.

Blynk is a digital dashboard for your iOS or Android device that allows you to easily build graphical interfaces by dragging and dropping widgets to control for your newest IoT projects! With the Blynk app you will be able to control the Blynk board or any other compatible hardware remotely by displaying sensor data, analyzing your surroundings, activating a function of your project and much more.

Are you just getting started with IoT or electronics? Our IoT Starter Kit includes all the parts to complete the fourteen starting IoT projects.

Note: The Blynk app is compatible with iDevices running iOS 7.0+, and Android’s running any version above or equal to 4.0.

 

Getting started guide

15.00 KWD Add to cart

EBOT servo motor FUTABA -180 degrees

Futaba S3003 Servo Motor is a decent servo for every hobbyist and electronics student. The powerful motor is PWM controlled for easy interfacing with Ebot for various application and projects.

S3003 standard NIB servo for RC car plane. High torque analog servo. Stable and shock proof. Compliant with most standard receiver connector. Great for truck, boat, racing car, helicopter and airplane.

3.250 KWD Add to cart

eBot 3.2kg.cm Plastic Gears Analog Servo 180 degree FS5103B -Feetech

The FS5103B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included. This servo can work with both 5 V and 3.3 V servo signals.

Key specs at 6 V: 0.16 sec/60°, 53 oz-in (3.8 kg-cm), 40 g.

The FS5103B is a general-purpose standard-size analog servo from FEETECH. The output shaft is supported by two ball bearings for reduced friction. The FS5103B works with standard RC servo pulses, providing a running angle of approximately 180° over a servo pulse range of 600 µs to 2400 µs, and it has a 12″ (30 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible.

3.250 KWD Add to cart

eBot 3kg.cm 360 Degree Continuous Rotation Servo FS5103R-Feetech

The FS5106R is a standard-sized servo that has been built by FEETECH specifically for continuous rotation, making it an easy way to get your robot moving. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. This servo can work with both 5 V and 3.3 V servo signals.

Key specs at 6 V: 95 RPM (no-load), 83 oz-in (6 kg-cm), 40 g .

The FS5106R is a standard-sized servo that has been built by FEETECH (formerly known as Fitec) specifically for continuous rotation. At 6 V, it has a maximum rotation speed of 95 RPM (no-load) and can produce up to 83 oz-in (6 kg-cm) of torque. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great actuator for beginner robotics projects.

The FS5106R continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. The default rest point is 1.5 ms, but this can be adjusted by using a small screwdriver to turn the middle-point positioner. Pulse widths above the rest point result in counterclockwise rotation, with speed increasing as the pulse width increases; pulse widths below the rest point result in clockwise rotation, with speed increasing as the pulse width decreases.

The servo has a 12″ (300 mm) lead that is terminated with a JR-style connector and includes additional servo horns and mounting hardware. The following picture shows an example of the hardware that might be included (actual hardware could vary):

4.500 KWD Add to cart

Polycrystalline Solar Panel 90*90mm 5V, 200mA

Maximum efficiency Monocrystalline solar cells. Encapsulated with low reflecting water clear epoxy to protect against physical impact and harsh outdoor environments.

Applications:

1. Small home projects

2. Science projects

3. Electronic applications

4. Charge small DC battery

5. Build your own powered models, toys and solar display etc

 

1.50 KWD Add to cart

Maxell CR2032 Lithium Battery - 3V

The CR2032 Hitachi Maxell Japan make Lithium Coin Cell is 100% Authentic, Powerful and has long life. It is widely used in Laptops, Notebooks, Calculators, Remote Controls & many 3V operated devices as a durable source of power.
 

0.500 KWD Add to cart

RC DIY Block Building Drone

The RC DIY Block Building Drone is the perfect starting block to get your child's science, technology, information sciences and mathematics skills stimulated and sharpened. The perfect constructive toy for a child to spend time with, this drone is fully customizable to create an enthralling experience of unparalleled edutainment. Featuring 360-degree flips, return function, 20-meter range, LED lights and a flight time of up to 8 minutes, this drones price makes its affordability the ultimate must-have for any parent looking to invest in their children's engineering aptitude.

18.00 KWD Add to cart