Shop

Premium Male to male Jumper Wires (40 pcs /set) -20 cm

These premium jumper wires are 20cm long and come in a ‘strip’ of 40 (4 pieces of each of ten rainbow colors). They have 0.1″ male  header contacts on both end and fit cleanly next to each other on standard-pitch 0.1″ (2.54mm) header.

The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.

For best results, when plugging these in a line, have the sides with the ‘silver latch bit’ sticking out since that side is a tiny bit wider than 0.1″

0.750 KWD Add to cart

Premium Male to male Jumper Wires (40 pcs /set) -10 cm

These premium jumper wires are 10cm long and come in a ‘strip’ of 40 (4 pieces of each of ten rainbow colors). They have 0.1″ male  header contacts on both ends and fit cleanly next to each other on standard-pitch 0.1″ (2.54mm) header.

The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.

For best results, when plugging these in a line, have the sides with the ‘silver latch bit’ sticking out since that side is a tiny bit wider than 0.1″

0.750 KWD Add to cart

Premium female to female Jumper Wires (40 pcs /set) -20 cm

These premium jumper wires are 20cm long and come in a ‘strip’ of 40 (4 pieces of each of ten rainbow colors). They have 0.1″ female header contacts on both end and fit cleanly next to each other on standard-pitch 0.1″ (2.54mm) header.

The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.

For best results, when plugging these in a line, have the sides with the ‘silver latch bit’ sticking out since that side is a tiny bit wider than 0.1″

0.500 KWD Add to cart

Premium female to female Jumper Wires (40 pcs /set) -10 cm

These premium jumper wires are 10cm long and come in a ‘strip’ of 40 (4 pieces of each of ten rainbow colors). They have 0.1″ female header contacts on both end and fit cleanly next to each other on standard-pitch 0.1″ (2.54mm) header.

The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.

For best results, when plugging these in a line, have the sides with the ‘silver latch bit’ sticking out since that side is a tiny bit wider than 0.1″

 

0.500 KWD Add to cart

Premium male to female Jumper Wires (40 pcs /set) -20 cm

These premium jumper wires are 20cm long and come in a ‘strip’ of 40 (4 pieces of each of ten rainbow colors). They have 0.1″ male and female header contacts on different  end and fit cleanly next to each other on standard-pitch 0.1″ (2.54mm) header.

The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.

For best results, when plugging these in a line, have the sides with the ‘silver latch bit’ sticking out since that side is a tiny bit wider than 0.1″

0.500 KWD Add to cart

Premium male to female Jumper Wires (40 pcs /set) -10 cm

These premium jumper wires are 10cm long and come in a ‘strip’ of 40 (4 pieces of each of ten rainbow colors). They have 0.1″ male and  female header contacts on different  end and fit cleanly next to each other on standard-pitch 0.1″ (2.54mm) header.

The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.

For best results, when plugging these in a line, have the sides with the ‘silver latch bit’ sticking out since that side is a tiny bit wider than 0.1″

0.500 KWD Add to cart

Patches for EMG Electromyography Sensor PRO - MySignals

These high quality disposable electrodes are to be used to measure EEG, ECG and EMG. They are to be used once and are very handy because of integrated gel. They adhere very well to the skin and are clean to use. One bag contains 50 electrodes. Ø 35 mm. Electrode type: H135SG Covidien. Formerly Kendall / Tyco ARBO.

This ECG/EMG/EEG electrode is ideal for a variety of purposes and is frequently used for Neurofeedback and Biofeedback.

The H135SG has a unique, patented pre-gelled adhesive side with non-irritating gel, especially developed to prevent allergic reactions. These foam electrode is latex free and therefore suitable for every skin type.

The snap-on connector can easily be pushed on or removed from the electrode lead. Therefore you have optimal user friendliness as you dispose this electrode after every session! No more greasy electrodes as the H135SG will cover the surface of the electrode. This extends the life of your electrodes.

 

10.00 KWD Add to cart

3.7 V 850mAh rechargable battery

High Quality 3.7V 850mAh   Rechargeable Battery

 Battery Power Bank Application

1.Telecommunication: cellular phone, web phone, interphone, Bluetooth earphone.

2.Portable office devices: Notebook, PDA, portable electrograph, portable printer.

3.Video devices: GPS, digital camera, camcorder, portable DVD, portable television, MP3, MP4.

4.Portable exchange devices: POS, Handy, Fingerprint machine, portable stock machine.

5.Illuminate devices: miner lamp, searchlight.

6.Others: toys, models

2.00 KWD Add to cart

EBOT IOT Board

EBot IoT is an ESP32 powered development board that includes 4 analog input pins and 4 digital output pins. This board can be programed by using EBot blockly or arduino IDE in your PC, or EBot blockly in your smartphone.

Builtin features such as  WiFi, accelerometer/gyroscope/magnetometer, RTC, rechargable battery, touch buttons, buzzer, RGB LEDs and temperture sensor helps to implement number of projects without any additional sheilds or modules.

WiFi programming support via is enabled by default.

 

16.00 KWD Add to cart

EBOT music node with SD Card

The Music  node is built to make MP3 sound integration easier  with ebot.

it comes with SD card. So that the user can store different mp3 files and then can be used for the projects containing mp3.This node also comes with the USB jack. so that user can directly plug the node to the system to store the files.User can also use the node as SD card reader as well

When a USB micro  cable is connected to the music node the contents of the microSD card appears as a jump drive. Simply plug in the music node  and you'll be transferring MP3s, no need for drivers.

Sound output is provided via a 3.5mm headphone jack or poke-home connector allowing an external speaker to be connected without soldering.

5.00 KWD Add to cart

EBOT touchpad

Ebot touchpad is designed for connecting various inputs,  up to 11 inputs. there are 11 terminals where you can connect aligator clips. no need of soldering.Using the aligator clips, you can connect the Fruits and makes the project funny with ebot.

 

You can also uses the touchpad as  directional input like UP,DOWN,LEFT  and RIGHT.

there is a slider section on the right side.

You can connect the touchpad with 3 wire connection to ebot.

 

6.00 KWD Add to cart

Pixy Cam Version 2

The Pixy2 CMUcam5 is smaller, faster and more capable than the original Pixy. Like its predecessor, the Pixy2 can learn to detect objects that you teach it, just by pressing a button. Additionally, the Pixy2 has new algorithms that detect and track lines for use with line-following robots. With these new algorithms, you can detect intersections and “road signs” as well. The road signs can tell your robot what to do, such as turn left, turn right, slow down, etc. The best part is that the Pixy2 does all of this at 60 frames-per-second, so your robot can be fast, too!

No need to futz around with tiny wires — the Pixy2 comes with a special cable to plug directly into an Arduino and a USB cable to plug into a Raspberry Pi, so you can get started quickly. No Arduino or Raspberry Pi? No problem! The Pixy2 has several interfaces including SPI, I2C, UART, and USB with simple communications, so you get your chosen controller talking to the Pixy2 in short order.

The Pixy2 uses a color-based filtering algorithm to detect objects. Color-based filtering methods are popular because they are fast, efficient, and relatively robust. Pixy2 calculates hue and saturation of each RGB pixel from the image sensor and uses these as the primary filtering parameters. The hue of an object remains largely unchanged with changes in lighting and exposure. Changes in lighting and exposure can have a frustrating effect on color filtering algorithms, causing them to break. Pixy2’s filtering algorithm is robust when it comes to lighting and exposure changes.

Includes:

  • 1x Pixy2 CMUcam5
  • 1x Pixy IO to Arduino ISP Cable
  • 1x Micro USB Cable
  • 1x Mounting Hardware
35.00 KWD Add to cart

Power supply 12V 10 A -SMPS

DC 12V 10A Power Supply, SMPS, Driver, Switch Power Supply Driver, 90-240V 50/60Hz Product Description: Professional 12 Volt 10a DC Power Supply is Suitable for Powering a Wide Range of Applications Including 3d printer, projects ,CCTV Cameras and Wireless Routers. Features: 100% Brand New & Excellent Quality For Access Control System Protections: Overload / Over Voltage / Short Circuit Auto-Recovery After Protection Universal AC input / Full range 100% Full Load Burn-in Test Great Switching Power Supply for Home Appliances Design with Built-in EMI Filter, Improve Signal Precision. Approvals: 3C/FC/ CE EMC Standards

5.00 KWD Add to cart

Power Supply 48 v 5A - SMPS

  • COMES WITH BUILT-IN PROTECTIONS FOR OVER VOLTAGE, CURRENT & TEMPERATURE: Switch Mode Power Supply (SMPS) from EM Motion Modules has in-built protections against over voltage, current and temperature. Hence, it can tolerate wide supply range.
  • Our 48V, 5A SMPS has an AC Input Voltage Range of 100- 120VAC/200- 240 VAC and its output measures 48V DC, 5A and 240W.
  • OPERATING HUMIDITY & OPERATING TEMPERATURE: This 48V 5A Switched mode power supply from EM motion Modules has an operating humidity ranging 20% - 90% RH and an operating temperature ranging -10°C to +65°C.
  • COMES WITH A PERFORATED HEAT SINK: This 48V, 5A SMPS comes with a perforated heat sink that makes sure that heat will get dissipated outside reducing the overall temperature.
10.00 KWD Add to cart

Ebot USB Micro cable

This USB cable is very common nowadays.These cables are  found on newer mobile devices such as cellphones, GPS units, PDAs and digital cameras. Micro-USB B offers a connection physically smaller in size to a USB Mini-b, while still supporting the high speed transfer rate of 480 Mbps and On-The-Go features. The connection can be easily identified by its black-colored receptacle and compact 5 pin design.

1.500 KWD Add to cart