Shop

9V 2.1 x 5.5mm Male DC Plug to 9v battery Clip Cable

9V Battery Button clip Power Plug  white cable.

0.75 KWD Add to cart

Arduino IR remote +reciever

Wireless IR Receiver Module DIY Kit for Arduino Infrared Remote Control Module

Arduino suite by ultrathin Mini infrared wireless remote control infrared remote control and 38 KHZ infraredreceiving module, the Mini ultra-thin has 20 function keys, the infrared emission furthest distance up to 8 meters, very suitable for indoor control devices of all kinds. Infrared remote control receiving module can receive standard 38 KHZ modulation signals, by means of programming the Arduino, the remote control signal decoding operation can be realized, which can produce all kinds of remote control robots and interactive work.

1.5 KWD Add to cart

keyestudio Digital IR Transmitter Module

IR Transmitter Module is designed for IR communication which is widely used for operating the television device from a short line-of-sight distance. The remote control is usually contracted to remote. 
Since infrared (IR) remote controls use light, they require line of sight to operate the destination device. The signal can, however, be reflected by mirrors, just like any other light sources. 
If operation is required where no line of sight is possible, for instance when controlling equipment in another room or installed in a cabinet, many brands of IR extenders are available for this on the market. Most of these have an IR receiver, picking up the IR signal and relaying it via radio waves to the remote part, which has an IR transmitter mimicking the original IR control. 
Infrared receivers also tend to have a more or less limited operating angle, which mainly depends on the optical characteristics of the phototransistor. However, it’s easy to increase the operating angle using a matte transparent object in front of the receiver. 

2.5 KWD Add to cart

Make: Getting Started with Raspberry Pi - 3rd Edition

What can you do with the Raspberry Pi, the affordable computer the size of a credit card? All sorts of things! If you're learning how to program---or looking to build new electronic parts---"Getting Started with Raspberry Pi" will show you just how valuable that flexible little platform can be.

Updated to include coverage of the Raspberry Pi Models 2 and 3, "Getting Started with Raspberry Pi" takes you step-by-step through many fun and educational possibilities. Take advantage of several preloaded programming languages. Use the Raspberry Pi with Arduino. Create Internet-connected projects. Play with multimedia. With Raspberry Pi, you can do all of this and more!

Info:

  • Authors: Matt Richardson and Shawn Wallace
  • Publisher: O'Reilly Media/Make Media
  • Paperback: 186 pages
  • ISBN-13: 978-1-6804-5246-4
10.00 KWD Add to cart

Resistor 10K Ohm 1/4 Watt (5 Nos.)

These are your run-of-the-mill 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 10K ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project.

 

Note: image for respresentation only. product color will vary.

0.200 KWD Add to cart

Resistor 4.7 K Ohm 1/4 Watt (5 Nos)

These are your run-of-the-mill 1/4 Watt,  PTH resistors. Commonly used in breadboards and other prototyping applications, these 4.7K ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project.

 

Note: image for respresentation only. product color will vary.

0.200 KWD Add to cart

Resistor 1 K Ohm 1/4 Watt (5 Nos)

These are your run-of-the-mill 1/4 Watt, PTH resistors. Commonly used in breadboards and other prototyping applications, these 1 K ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project.

Note: image for respresentation only. product color will vary

0.200 KWD Add to cart

Resistor 100 Ohm 1/4 Watt (5 Nos)

These are your run-of-the-mill 1/4 Watt,  PTH resistors. Commonly used in breadboards and other prototyping applications, these 100 ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project.

 

Note: image for respresentation only. product color will vary.

0.200 KWD Add to cart

Resistor 22 Ohm 1/4 Watt (5 Nos)

These are your run-of-the-mill 1/4 Watt,  PTH resistors. Commonly used in breadboards and other prototyping applications, these 22 ohms resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project.

 

Note: image for respresentation only. product color will vary.

0.200 KWD Add to cart

Resistor 47 Ohm 1/4 Watt ( 5 Nos)

These are your run-of-the-mill 1/4 Watt,  PTH resistors. Commonly used in breadboards and other prototyping applications, these 47 ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project.

 

Note: image for respresentation only. product color will vary

0.200 KWD Add to cart

Resistor 150 Ohm 1/4 Watt (5 Nos)

These are your run-of-the-mill 1/4 Watt,  PTH resistors. Commonly used in breadboards and other prototyping applications, these 150 ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project.

 

Note: image for respresentation only. product color will vary.

0.200 KWD Add to cart

Resistor 200 Ohm 1/4 Watt (5 Nos)

These are your run-of-the-mill 1/4 Watt,  PTH resistors. Commonly used in breadboards and other prototyping applications, these 200 ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project.

 

Note: image for respresentation only. product color will vary.

0.200 KWD Add to cart

Resistor 220 Ohm 1/4 Watt (5 Nos)

These are your run-of-the-mill 1/4 Watt,  PTH resistors. Commonly used in breadboards and other prototyping applications, these 220 ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project.

 

Note: image for respresentation only. product color will vary.

0.200 KWD Add to cart

Resistor 270 Ohm 1/4 Watt (5 Nos)

These are your run-of-the-mill 1/4 Watt,  PTH resistors. Commonly used in breadboards and other prototyping applications, these 270 ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have few to no issues using them in your next project.

 

Note: image for respresentation only. product color will vary.

0.200 KWD Add to cart