Shop

Elastolite kit

ElastoLite® is a fantastic line of flexible electroluminescent (EL) panels, inverters, and connectors that can be sewn into clothing and used in a multitude of other lighting applications. The biggest question we've received with these EL panels is, "Where do I start?" We are pleased to introduce the ElastoLite® Kit, an all in one starting kit that includes everything you need to get electroluminescent panels and equipment incorporated into your project! Within this kit you will find a 2" x 2" Green EL panel, an INV135 Inverter, and all the hookups you need to connect the two. All you will need to do is iron the pieces together to shed a little bit of electroluminescent light on your next project.

ELastoLite® is a waterproof electroluminescent lamp line that allows you to apply light to any article of clothing or project. Thanks to a 3-dimensional, elastomeric, membranous polymer thick film, this EL line can be applied to almost any surface with no loss to flexibility and movement.

35 KWD Add to cart

Opensmart serial mp3 player + Micro SD card

The module is a kind of simple MP3 player device which is based on a high-quality MP3 audio chip. It can support 8KHz~48KHz sampling frequency MP3 and WAV file formats. There is a TF card socket on board, so you can plug the micro SD card that stores audio files. MCU can control the MP3 playback state by sending commands to the module via UART port, such as switch songs, change the volume and play mode and so on. You can also debug the module via USB to UART module. It is compatible with Arduino/AVR/ARM/PIC.

6 KWD Add to cart

JPEG color camera TTL Interface

LinkSprite's latest serial port camera module can capture high resolution pictures and transport them over TTL serial, making it ideal for embedded applications. And it can do it in the dark, thanks to infrared LEDs. The infrared feature even has a built-in light sensor, so as soon as the ambient light gets low enough, it will automatically turn on the infrared LEDs for night vision!

35 KWD Add to cart

Makey makey board

The Makey Makey is a board with an Atmega32u4 which behaves like a HID (Human Interface Device) device, such as a keyboard or mouse. The board has solderless head pins and pads to connect alligator clips to which allows you to connect almost anything up to create a circuit and trigger things on your computer. Your imagination is the limit!

On the top side of the board are 6 pads (4 arrow keys and space bar + left click) which you can connect alligator clips to, solder to, or any other form of connection. There are another 12 inputs on the back, 6 for keyboard keys, and 6 for mouse motion, which you can access with jumpers via the female headers. The best part about Makey Makey is that it is an Arduino compatible board, which means that if you want to change the keyboard triggers from certain keys, or experiment with different program options, you can easily reprogram it using the Arduino IDE!

The Makey Makey is designed to work out of the box and requires no programming or electronics knowledge to get started.

15.00 KWD Add to cart

Batterybox Black (2 AA) with power jack head

Plastic Battery Storage Case Box Holder for 2 x 18650 Batteries 3.7V

0.5 KWD Outof Stock

Breadboard Power supply-YW robot545043

A 3.3V and 5V Breadboard Power Supply Module with series diode, polarity reversal protection. The module can take 6.5V to 12V input and can produce 3.3V and +5V. Can also output 5V on USB connector and can also take input through USB connector.

Its a must have product for experimenters those have to test/prototype electronic circuits on the breadboard or perforated/veroboards.

 

1.5 KWD Add to cart

BatterBattery box 8AA batteriesBlack casey box 8AA batteriesBlack case


This high quality battery holder case can hold 8 AA batteries which make 12V battery pack from alkaline cells.It can hold standard AA size batteries,either for alkascent or rechargable batteries, the black and red two wire design is great for easily soldering and connecting.

Battery Type: 8*1.5V AA Battery
Cable Length:15cm
Battery Strap Length:30cm
Material: Plastic and Mental
Color: Black

Package includes:
2* 8slots AA battery holder with case cover 
2* black battery strap

2 KWD Add to cart

LCD with header pins

LCD1602 is a parallel type display having 16 rows and 2 column. LCD can display any character, number and symbol. This is a most basic display for Arduino, AVR, PIC or any other controller and processor.

2 KWD Add to cart

ELastoLite Panel - 5x3 inches

These are 5" x 3" electroluminescent (EL) panels from ELastoLite®. These EL panels are highly flexible, waterproof, and with a little bit of assembly can be easily be applied to most articles of clothing.

ELastoLite® is a waterproof electroluminescent lamp line that allows you to apply light to any article of clothing or project. Thanks to a 3-dimensional, elastomeric, membranous polymer thick film, this EL line can be applied to almost any surface with no loss to flexibility and movement.

22 KWD Add to cart

EL Panel - Blue (10x10cm)

Who doesn't love the soft glow of electroluminescence? This EL panel is a flexible plastic sheet which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It's a lot like the ever-popular EL wire except, well, it's a panel. Panels are particularly well suited for backlighting LCDs as well as illuminated signage.

These can be driven with any of the EL inverters and sequencers that we carry and come in a variety of bright colors (check below for other colors). This particular panel is 10cm square and illuminates blue. It is attached to a 20cm cable which is terminated with a JST PH connector.

15 KWD Add to cart

SparkFun RGB Light Sensor - ISL29125

If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements, the ISL29125 breakout board may be just what you need. The ISL29125 breakout board makes it very easy to sense and record the light intensity of the general red, green, and blue spectrums of visible light while rejecting IR from light sources. You can then use these color sensor readings for the purposes of logging and finding patterns, or creatively calculate and make control decisions in your electronic projects.

Each pin from the ISL29125 has been broken out to allow you to interface with it, SDA, SCL, 3.3V, GND, and even an optional INT pin is available for use. The ISL29125 Light Sensor operates at 3.3V but if you plan on using this chip with a 5V microcontroller make sure to use a logic level converter.

5.00 KWD Add to cart

SparkFun MP3 Player Shield + Micro SD card

The SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill microSD card, thus giving you the ability toadd music or sound effects to any project. With this board you can pull MP3 files from an microSD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player! The MP3 Shield utilizes the VS1053B MP3 audio decoder IC to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis.

The VS1053 receives its input bitstream through a serial input bus (SPI). After the stream has been decoded by the IC, the audio is sent out to both a 3.5mm stereo headphone jack, as well as a 2-pin 0.1" pitch header.

13 KWD Add to cart

ELastoLite Inverter Connector

These green ELastoLite inverter connectors are to be used in conjunction with the INV133 electroluminescent inverter for driving ELastoLite panels. Each connector is 4.5" long with bare wire leads that can easily be ironed to ELastoLite's connect patches and bridge the gap between your inverter and your panel.

ELastoLite® is a waterproof electroluminescent lamp line that allows you to apply light to any article of clothing or project. Thanks to a 3-dimensional, elastomeric, membranous polymer thick film, this EL line can be applied to almost any surface with no loss to flexibility and movement.

3 KWD Add to cart

ELastoLite Circuit Tape - 3 feet

This is three feet of circuit tape that has been designed for the ELastoLite® electroluminescent line of products. Each package of this tape offers two 0.5mm thick conductive threads spaced 5mm apart. Simply iron this tape onto your e-textile project and it is there for good so make sure you iron it to where you want it!

Though this circuit tape is meant to be used with ELastoLite® products it can be used in a multitude of different applications where ironing circuitry onto articles of clothing would be easier than sewing!

ELastoLite® is a waterproof electroluminescent lamp line that allows you to apply light to any article of clothing or project. Thanks to a 3-dimensional, elastomeric, membranous polymer thick film, this EL line can be applied to almost any surface with no loss to flexibility and movement.

2.5 KWD Add to cart

Arduino Stackable Header Kit - R3

These headers are made to work with the Arduino Uno R3, Leonardo and new Arduino boards going forward. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields. This kit includes 4 headers (2 8-pin, 1 10-pin and 1 6-pin), enough to connect a shield to an Arduino board. These are the same headers we use in our tutorials and with our own shields.

1 KWD Add to cart